29 CFR 1910.1000 ยท NIOSH

Intro to Industrial Hygiene

  • About 2 hours
  • 13 modules and a final exam
  • Narrated lessons

About this course

Learn how industrial hygiene works under OSHA: recognizing health hazards, reading OSHA PELs, NIOSH RELs, and ACGIH TLVs, calculating time-weighted averages and mixture exposures, planning air sampling, meeting substance-specific standards for silica and lead, managing noise and heat, choosing controls and respirators, and workers' rights to exposure records. Includes a hands-on exercise reviewing the exposure assessment at a small fabrication shop.

Who should take it: Supervisors, safety coordinators, maintenance and production leads, and anyone who decides when air sampling or noise monitoring is needed or how to control a health hazard.

You will learn to

  • Describe the four steps of industrial hygiene practice
  • Explain routes of entry and the difference between acute and chronic effects
  • Read and compare OSHA PELs, NIOSH RELs, and ACGIH TLVs
  • Calculate an 8-hour TWA and a mixture exposure using the formulas in 29 CFR 1910.1000
  • Outline a basic exposure assessment, including similar exposure groups and when to sample
  • Apply the hierarchy of controls and the main requirements of a respiratory protection program
  • Explain workers' rights to exposure and medical records

Modules

  1. Module 1Why Industrial Hygiene Matters
    8 pages
  2. Module 2Hazards and How They Get In
    8 pages
  3. Module 3Finding the Hazard Information
    6 pages
  4. Module 4Exposure Limits
    9 pages
  5. Module 5Calculating Exposure
    7 pages
  6. Module 6The Exposure Assessment Process
    10 pages
  7. Module 7Substance-Specific Standards
    7 pages
  8. Module 8Noise and Heat
    9 pages
  9. Module 9Controlling Exposures
    9 pages
  10. Module 10Records and Your Rights
    6 pages
  11. Module 11Practical Exercise at Riverbend Fabrication
    4 pages
  12. Module 12Learning from Incidents
    9 pages
  13. Module 13Practice Making Exposure Decisions
    2 pages

Final exam

20 questions · 80% to pass · no time limit. Practice questions in the lessons don't count toward your grade.

The exam opens after you finish the lessons.

Before you begin

This course is for general safety training and education only. It is not legal advice and is not an OSHA Outreach (10- or 30-hour) course. OSHA regulations control if anything here differs from them, and employers remain responsible for providing site-specific training and meeting all OSHA requirements. This course reflects requirements as of November 2026.

Read the full Legal Disclaimer and Terms of Use

To start this course, enter the course access code you received from the college.

Enter course access code

How this course works

  • Work at your own pace. Your place is saved, so you can stop and come back anytime.
  • Modules open in order. Finish every page of a module, including its practice questions, to open the next one. You can always go back to earlier modules.
  • Every lesson page can be read aloud. Use the narration player at the top of the page.
  • Short practice questions check your understanding as you go.
  • When you pass the final exam, the college is notified and prepares your certificate.