29 CFR 1910.147
OSHA Standards for Lockout/Tagout
- About 2 hours
- 13 modules and a final exam
- Narrated lessons
About this course
Learn what OSHA's standard for the control of hazardous energy requires: the forms of hazardous energy, who may lock out equipment, when the rule applies and its exceptions, lockout and tagout devices, the energy control program, the six steps for applying energy control, releasing equipment safely, and group lockout, shift changes, and contractors. Includes a hands-on exercise planning a lockout for a hydraulic press.
Who should take it: Maintenance mechanics, electricians, machine operators, setup technicians, supervisors, contractors, and anyone who services, maintains, operates, or works around machines and equipment with hazardous energy.
You will learn to
- Explain the purpose and scope of 29 CFR 1910.147 and its main exceptions
- Identify the forms of hazardous energy, including stored and residual energy
- Distinguish authorized, affected, and other employees and their roles
- Compare lockout and tagout, and describe the requirements for lockout and tagout devices
- Describe the energy control program: procedures, training, and periodic inspections
- Apply the six steps of energy control and the requirements for release from lockout
- Describe the requirements for testing, group lockout, shift changes, and outside contractors
Modules
-
Module 1Why Lockout/Tagout Matters8 pages
-
Module 2Hazardous Energy9 pages
-
Module 3Key Terms and People7 pages
-
Module 4When the Standard Applies7 pages
-
Module 5Lockout and Tagout Devices9 pages
-
Module 6The Energy Control Program10 pages
-
Module 7Applying Lockout: Step by Step10 pages
-
Module 8Releasing from Lockout6 pages
-
Module 9Group Lockout, Shift Changes, and Contractors7 pages
-
Module 10Finding the Standard3 pages
-
Module 11Practical Exercise: Plan a Lockout4 pages
-
Module 12Case Studies: Learning from Incidents14 pages
-
Module 13Practice: Lockout/Tagout Decisions2 pages
Final exam
20 questions · 80% to pass · no time limit. Practice questions in the lessons don't count toward your grade.
The exam opens after you finish the lessons.
Before you begin
This course is for general safety training and education only. It is not legal advice and is not an OSHA Outreach (10- or 30-hour) course. OSHA regulations control if anything here differs from them, and employers remain responsible for providing site-specific training and meeting all OSHA requirements. It does not include hands-on training or a skills evaluation; employers must provide any hands-on instruction and competency checks their workers need. This course reflects requirements as of October 2026.
Read the full Legal Disclaimer and Terms of Use
To start this course, enter the course access code you received from the college.
Enter course access codeHow this course works
- Work at your own pace. Your place is saved, so you can stop and come back anytime.
- Modules open in order. Finish every page of a module, including its practice questions, to open the next one. You can always go back to earlier modules.
- Every lesson page can be read aloud. Use the narration player at the top of the page.
- Short practice questions check your understanding as you go.
- When you pass the final exam, the college is notified and prepares your certificate.